Impacts of Biodiesel on Pollutant Emissions of a JP-8–Fueled Turbine Engine

Abstract

The impacts of biodiesel on gaseous and particulate matter (PM) emissions of a JP-8–fueled T63 engine were investigated. Jet fuel was blended with the soybean oil-derived methyl ester biofuel at various concentrations and combusted in the turbine engine. The engine was operated at three power settings, namely ground idle, cruise, and takeoff power, to study the impact of the biodiesel at significantly different pressure and temperature conditions. Particulate emissions were characterized by measuring the particle number density (PND; particulate concentration), the particle size distribution, and the total particulate mass. PM samples were collected for off-line analysis to obtain information about the effect of the biodiesel on the polycyclic aromatic hydrocarbon (PAH) content. In addition, temperature-programmed oxidation was performed on the collected soot samples to obtain information about the carbonaceous content (elemental or organic). Major and minor gaseous emissions were quantified using a total hydrocarbon analyzer, an oxygen analyzer, and a Fourier Transform IR analyzer. Test results showed the potential of biodiesel to reduce soot emissions in the jet-fueled turbine engine without negatively impacting the engine performance. These reductions, however, were observed only at the higher power settings with relatively high concentrations of biodiesel. Specifically, reductions of ～15% in the PND were observed at cruise and takeoff conditions with 20% biodiesel in the jet fuel. At the idle condition, slight increases in PND were observed; however, evidence shows this increase to be the result of condensed uncombusted biodiesel. Most of the gaseous emissions were unaffected under all of the conditions. The biodiesel was observed to have minimal effect on the formation of polycyclic aromatic hydrocarbons during this study. In addition to the combustion results, discussion of the physical and chemical characteristics of the blended fuels obtained using standard American Society for Testing and Materials (ASTM) fuel specifications methods are presented.     

Temporal and Spatial Turbidity Patterns Over 30 Years in a Managed Forest of Western Washington1

Abstract: Forest practices have progressively changed over the last 30 years in the Pacific Northwest to address water quality concerns. There have been some assessments of these new management practices made at a site scale but very few studies have attempted to evaluate their efficacy at reducing cumulative sediment production at a watershed scale. Such an evaluation is difficult due to the spatial and temporal variability in sediment delivery and transport processes. Due to this inherent variability, detecting a response to management changes requires a long‐term data record. We utilized a water quality dataset collected over 30 years at four locations in the Deschutes River watershed (western Washington) to assess trends in turbidity and whether sediment control procedures implemented over this time period had any detectable influence. The sample sites ranged from small headwater streams (2.4 and 3.0 km²) to the mainstem of the Deschutes River (150 km²). Declining trends in turbidity were detected at all the permanently monitored sites. The mainstem Deschutes River site, which integrates sediment processes from the entire study watershed, showed dramatic declines in turbidity even with continued active forest management. For the small basins, logging and road construction occurred in the 1970s and 1980s and turbidity declined thereafter, achieving prelogging levels by 2000. There are no temporal trends in flow that could be responsible for the observed trends in turbidity. Our results suggest that increased attention to reducing sediment production from roads and minimizing the amount of road runoff reaching stream channels has been the primary cause of the declining turbidity levels observed in this study.     

An overview of short‐term tests for the mutagenic and carcinogenic potential of pesticides

Abstract

In the last few years, marked progress has been made in the development of methods for evaluating the mutagenic and carcinogenic potential of pesticide chemicals. The correlation of genetic and related biological activity in short‐term tests with carcinogenic activity in whole animals allows the utilization of short‐term mutagenicity bioassays to prescreen chemicals for effects related to mutation induction and presumptive carcinogenicity. In addition, bioassays now available can measure directly the chemical transformation of normal cells in culture into cells capable of producing tumors when injected into animals.

This paper will review briefly the major types of relevant short‐term tests and will develop a rationale for a phased approach to the evaluation of the mutagenic and carcinogenic potential of environmental chemicals. This approach involves the sequential application of bioassays which are organized into a three‐level matrix emphasizing first detection, then confirmation, and finally hazard assessment. Chemicals demonstrating positive results in the short‐term detection systems and confirmatory bioassays are pursued in higher level whole animal tests. A core battery of tests is proposed to operationally define a negative result. The phased approach should facilitate a cost effective utilization of limited testing resources and provide protection for human health in proportion to the anticipated hazard.

Results obtained in evaluating a series of thirty‐eight pesticide chemicals according to the phased approach are discussed in detail.     

Nickel Speciation of Residual Oil Fly Ash and Ambient Particulate Matter Using X-ray Absorption Spectroscopy

ABSTRACT

The chemical speciation of Ni in fly ash produced from ~0.85 wt % S residual (no. 6 fuel) oils in laboratory (7 kW)- and utility (400 MW)-scale combustion systems was investigated using X-ray absorption fine structure (XAFS) spectroscopy, X-ray diffraction (XRD), and acetate extraction [1 M NaOAc-0.5 M HOAc (pH 5) at 25 °C]-anodic stripping voltammetry (ASV). XAFS was also used to determine the Ni speciation of ambient particulate matter (PM) sampled near the 400-MW system. Based on XAFS analyses of bulk fly ash and their corresponding acetate extraction residue, it is estimated that >99% of the total Ni (0.38 wt %) in the experimentally produced fly ash occurs as NiSO₄-xH₂O, whereas >95% of the total Ni (1.70 and 2.25 wt %) in two fly ash samples from the 400-MW system occurs as NiSO₄-xH₂O and Ni-bearing spinel, possibly NiFe₂O₄. Spinel was also detected using XRD. Acetate extracts most of the NiSO₄-xH₂O and concentrates insoluble NiFe₂O₄ in extraction residue. Similar to fly ash, ambient PM contains NiSO₄-xH₂O and NiFe₂O₄;

however, the proportion of NiSO₄-xH₂O relative to NiFe₂O₄ is much greater in the PM. Results from this and previous investigations indicate that residual oil ash produced in the 7-kW combustion system lack insoluble Ni (e.g., NiFe₂O₄) but are enriched in soluble NiSO₄-xH₂O relative to fly ash from utility-scale systems. This difference in Ni speciation is most likely related to the lack of additive [e.g., Mg(OH)₂] injection and residence time in the 7-kW combustion system.     

Computer Simulations of Particle Deposition in the Developing Human Lung

ABSTRACT

An age-dependent theoretical model has been developed to predict PM dosimetry in children's lungs. Computer codes have been written that describe the dimensions of individual airways and the geometry of branching airway networks within developing lungs. Breathing parameters have also been formulated as functions of subject age. Our computer simulations suggest that particle size, age, and activity level markedly affect deposition patterns of inhaled air pollutants. For example, the predicted lung deposition fraction is 38% in an adult but is nearly twice as high (73%) in a 7-month-old for 2-um particles inhaled during heavy breathing. Tracheobronchial (TB) and pulmonary (or alveolated airways, P) deposition patterns may also be calculated using the model. Due to different clearance processes in the TB and P airways (i.e., mucociliary transport and macrophage action, respectively), the determination of compartmental dose is important for PM risk assessment analyses. Furthermore, the results of such simulations may aid in the setting of regulatory standards for air pollutants, as the data provide a scientific basis for estimating dose delivered to a designated sensitive subpopulation (children).     

Simplified method for wetland habitat assessment

This article presents a wetland habitat assessment technique (HAT) using birds as indicators of habitat quality. The technique is quick, simple, inexpensive, and lends itself to screening large numbers of wetlands. HAT can provide input to more extensive evaluation techniques. Measures of species diversity and rarity are used to assess the quality of the wetland. By applying the notion of ecologically optimum size, the technique addresses the issue of economic efficiency. Results of field testing HAT on 11 tidally influenced wetlands are presented to illustrate HAT's utility. Application of HAT in a variety of situations is discussed.     

Overland and near-surface transport of Cryptosporidium parvum from vegetated and nonvegetated surfaces

Understanding microbial pathogen transport patterns in overland flow is important for developing best management practices for limiting microbial transport to water resources. Knowledge about the effectiveness of vegetative filter strips (VFS) to reduce pathogen transport from livestock confinement areas is limited. In this study, overland and near-surface transport of Cryptosporidium parvum has been investigated. Effects of land slopes, vegetation, and rainfall intensities on oocyst transport were examined using a tilting soil chamber with two compartments, one with bare ground and the other with brome (Bromus inermis Leyss.) vegetation. Three slope conditions (1.5, 3.0, and 4.5%) were used in conjunction with two rainfall intensities (25.4 and 63.5 mm/h) for 44 min using a rainfall simulator. The vegetative surface was very effective in reducing C. parvum in surface runoff. For the 25.4 mm/h rainfall, the total percent recovery of oocysts in overland flow from the VFS varied from 0.6 to 1.7%, while those from the bare ground condition varied from 4.4 to 14.5%. For the 63.5 mm/h rainfall, the recovery percentages of oocysts varied from 0.8 to 27.2% from the VFS, and 5.3 to 59% from bare-ground conditions. For all slopes and rainfall intensities, the total (combining both surface and near-surface) recovery of C. parvum oocysts was considerably less from the vegetated surface than those from the bare-ground conditions. These results indicate that the VFS can be a best management practice for controlling C. parvum in runoff from animal production facilities.     

Contemplating the Assessment of Great River Ecosystems

The science and practice of assessing the status and trends of ecological conditions in great rivers have not kept pace with perturbation wrought on these systems. Participants at a symposium sponsored by the U.S. Environmental Protection Agency (USEPA) and the Council of State Governments concluded that useful and efficient assessments of great river ecosystems require thoughtful alignment of sampling designs, spatial and temporal scales, indicators, management needs, and ecosystem characteristics. Site-specific physical, chemical, and biological data long accumulated by monitoring programs have value but fail to provide the integrated system-wide perspective required for adaptive management and the Clean Water Act. Use of existing data may be limited by methodological incompatibilities, access difficulties, and the exclusive applicability of data to specific habitats or sites. The transition from site-specific to system-wide assessments benefits from research being done by USEPA's Environmental Monitoring and Assessment Program (EMAP) and other programs that use probability surveys and biological indicators. Indicators of various taxa (in particular fish, algae, and benthic invertebrates) have been successfully developed for great rivers. However, optimizing the information these ecological indicators convey to managers and the public is the subject of ongoing research.     

Nickel and sulfur speciation of residual oil fly ashes from two electric utility steam-generating units

Representative duplicate fly ash samples were obtained from the stacks of 400- and 385-MW utility boilers (Unit A and Unit B, respectively) using a modified U.S. Environmental Protection Agency (EPA) Method 17 sampling train assembly as they burned 0.9 and 0.3 wt % S residual (No. 6 fuel) oils, respectively, during routine power plant operations. Residual oil fly ash (ROFA) samples were analyzed for Ni concentrations and speciation using inductively coupled plasma-atomic emission spectroscopy, X-ray absorption fine structure (XAFS) spectroscopy, and X-ray diffraction (XRD). ROFA deionized H2O extraction residues were also analyzed for Ni speciation using XAFS and XRD. Total Ni concentrations in the ROFAs were similar, ranging from 1.3-1.5 wt%; however, stack gas Ni concentrations in the Unit A were 0.990 microg/Nm3 compared with 0.620 microg/Nm3 for Unit B because of the greater residual oil feed rates employed at Unit A to attain higher 400-MW load conditions with a lower heating value oil. Ni speciation analysis results indicated that ROFAs from Unit A contain approximately 3 wt % NiSO4 x xH2O (where x is assumed to be 6 for calculation purposes) and appoximately 4.5 wt% of a Ni-containing spinel compound, similar in composition to (Mg,Ni)(Al,Fe)2O4. ROFAs from Unit B contain on average 2 wt% NiSO4 x 6 H20 and 1.1 wt% NiO. XAFS and XRD analyses did not detect any nickel sulfide compounds, including carcinogenic nickel subsulfide (Ni3S2) (XAFS detection limit is 5% of the total Ni concentration). In addition, XAFS measurements indicated that inorganic sulfate and organic thiophene species accounted for > 97% of the total S in the ROFAs. Unit A ROFAs contained much lower thiophene proportions because cyclone-separated ROFA reinjection is employed on this unit to collect and reburn the larger carbonaceous particles.